Autel MaxiIM IM508 with XP400 Pro is able to program key for Skoda Octavia 2013 24C32 all key lost via OBD.Easy to use, Here we are
Look at the new blank key (after inserting it into the ignition and turning it on, you can see “NO Key” on the dashboard).
Operation starts:
Connect Autel IM508 and Skoda Octavia 2013 via OBD2 port
IMMO>>SKODA>>Expert selection>>IMMO IV Instrument CAN>>Auto detect
Diagnostic program loading…
System data initializing…please wait
Establishing vehicle communication…
Current instrument type is VDO NEC+ 24C32 ,press OK
To program all key lost there 3 steps below:
- Read IMMO data
- Make dealer key
- Key learing
Step 1 Read IMMO data
Establishing vehicle communication to read IMMO data only takes a few seconds
Step 2.make dealer key
Connection programmer…
NOTE: please put a blank key in the XP400 PRO programmer keyhole and then press”OK”
Connection programmer…
Establishing communication with the key …
Make dealer key success!
Step 3 .Key learing
Check: Does the vehicle have keys?
Number of keys that need to be learned （1-8）
The next steps are to follow the Autel MaxiIM IM508 on-screen instruction to do until the car can start the car.
Establishing vehicle communication…
Please insert in sequence the keys that need to be learned into the ignition, switch within the 30s, and turn to ON, The keys should be changed at an interval of less than 5s, Number of keys learned/Number of keys that need to be learned: 0/1
Turn ignition off and wait for 5s, then turn the ignition switch to ON.
Key learning completed.
Used Autel MaxiIM IM508 and XP400 Pro to program key for Skoda Octavia 2013 with All Keys Lost. No dashboard out, no vag helper, no service mode, no precoded key, only OBD.