Autel EVO II User manual:

EVO II LUT

The official LUT for EVO II 8K V1.0 Jun-20-2020
– Applicable to DaVinci Resolve softwareDOWNLOAD

The official LUT for EVO II Pro 6K V 1.0 Jun-20-2020
– Applicable to DaVinci Resolve softwareDOWNLOAD

Windows: V1.1.0 (please click here to download)
Mac OS: V1.0.5 (please click here to download)

• • Support 64bit operational systems only (Windows 7 / 10, Mac OS)
  • Recommended screen resolution is 1920*1080 and above
  • Recommended CPU for desktop: Intel i5-4590 and above, CPU for laptop: Intel i5-8250U and above
  • Recommended to connect power supply for laptop users (to ensure system is running at highest performance settings and screen brightness)
• Calibration Instructions:
• Install Autel OA Calibration Tool on your PC / Mac
• Connect EVO II to your PC with USB-C cable
• Power on EVO II
• Run Autel Vision Assistant Program and wait for the connection, which may take up to 1 minute (if you wait for more than 1 minute and no response, please follow the steps below for troubleshooting)
  1. Close the Autel Vision Assistant and reopen
  2. Change your network IP address and avoid using 192.168.1.11, or disable your internet while using the calibration tool
  3. If a warning message is displayed indicating your CPU is not powerful enough for the calibration use a different PC
• Once connected, you will see the current status of all the sensors
• Select the first sensor requiring the auto-calibration to initiate calibration
• Follow the instructions in the top left corner of the screen, hold your EVO2 and aim the corresponding sensor at the screen as indicated
• Once all calibration steps on-screen are completed the results are auto-updated on your EVO II
• Repeat steps 6-8 until you have completed the auto-calibration for all indicated sensors
  Click here for video instruction

• Windows X64 v1.3.2 DOWNLOAD

IOS V1.7.5
Android v1.1.7.10

1. EVO II aircraft activation
2. Added Oblique photography mission mode
3. Added the option to turn off the LED indicators on front and rear arms
4. Added the option for Beta users to roll back the firmware to the latest public released version
5. Added radiometric support for infiRay 640T sensor in picture-in-picture mode
6. Added cross-hatch feature in Polygon missions
7. Users can manually input GPS coordinates in Waypoint missions
8. Added the option to adjust the OA break distance

1. Optimized takeoff button hold time to eliminate accidental activations
2. Optimized the IMU calibration diagram display
3. Optimized the warning message display times
4. Fixed mobile flight logs display error
5. Fixed English translation errors

1. EVO II aircraft activation
2. Added Oblique photography mission mode
3. Added the option to turn off the LED indicators on front and rear arms
4. Added the option for Beta users to roll back the firmware to the latest public released version
5. Added radiometric support for infiRay 640T sensor in picture-in-picture mode
6. Added cross-hatch feature in Polygon missions
7. Users can manually input GPS coordinates in Waypoint missions

1. Optimized takeoff button hold time to eliminate accidental activations
2. Optimized the IMU calibration diagram display
3. Optimized the warning message display times
4. Fixed the EXP setting saving issue in Android
5. Fixed English translation errors

• To use the iOS beta app:
  • Use your iOS device to visit this public invitation link: https://testflight.apple.com/join/tqiPLmbi
  • Follow the instruction in the link above to install the beta app using TestFlight.

• To use the Android beta app:
  • Use your mobile device to visit this link: https://play.google.com/apps/testing/com.autelrobotics.explorer
  • Login with your Google Play store registered account, if you are not already logged in.
  • Click the “BECOME A TESTER”
  • Click the link – download it on Google Play
  • Click “Install” and you will get the download installed

Firmware
Click here for Firmware V2.5.12 download

• • • • New Features:
      • – Added IMU Calibration
      • – Added the third axis compass calibration to improve calibration accuracy
      • – Added InfiRay 640T thermal camera with radiometric support (specific regions only)
      • – Added Time Lapse in Intelligent Flight Modes.
      • – Added SD exFAT large file system support (3.5 GB or more)

• • • Bug Fixes and Optimizations:
    • – Optimized gimbal stability
    • – Optimized gimbal automatic calibration by adding gyro bias calibration
    • – Improved the Smart Orbit performance
    • – Optimized the balance of picture sharpness and noise, color reproduction and the tones in some scenes for both 8K and 6K to improve JPEG image quality
    • – Changed the default video encoding format to H.265 for videos in 6K and 8K resolutions
    • – Resolved EXIF data error issue
    • – Fixed the “Gimbal is not ready” bug on firmware 2.5.11

• • Notes: After you upgrade the firmware, please perform gimbal auto calibration, IMU calibration and Compass calibration before the first flight. In order to support all the new features, please upgrade the Autel Explorer app to iOS V1.7.5, Android V1.1.7.10 and newer.

Click here for Firmware V2.5.18 download

• • • • New Features:
      • – EVO II aircraft activation
      • – Added Oblique photography mission mode
      • – Added the option to turn off the LED indicators on front and rear arms
      • – Added the option for Beta users to roll back the firmware to the latest public released version
      • – Added radiometric support for infiRay 640T sensor in picture-in-picture mode
      • – Added cross-hatch feature in Polygon missions
      • – Users can manually input GPS coordinates in Waypoint missions
      • – Added the option to adjust the OA break distance (iOS only)

• • • Bug Fixes and Optimizations:
    • – Optimized takeoff button hold time to eliminate accidental activations
    • – Optimized the IMU calibration diagram display
    • – Optimized the warning message display times
    • – Fixed mobile flight logs display error in iOS
    • – Fixed the EXP setting saving issue in Android
    • – Fixed English translation errors

• • Notes: After you upgrade the firmware, please perform gimbal auto calibration, IMU calibration and Compass calibration before the first flight. In order to support all the new features, please upgrade the Autel Explorer app to iOS V1.8.13, Android V1.1.7.18 and newer.

https://www.auteldiag.com/wholesale/autel-evo-2-drone/