Autel MaxiIM IM608 key programmer arrived yesterday from China, I got it to program my Chevrolet Volt 2011 all keys lost via OBD without no problem, I just follow the on-screen instruction to finish the whole job.
Operating steps:
- Step on the brakeand press the “Power” button to turn on ignition, then put the new blank key into slot of vehicle;
- Identify correct vehicle model: IMMO -> Accept -> GM -> Manual selection-> Chevrolet-> USA -> Volt-> 2011- 2015 smart key-> Yes to confirm the vehicle profile->
- Tap: Control Unit -> Read Immobilizer Password -> Read Immobilizer Password(CAN) – >Password Reading
Read the Notes and follow it to do:
-Please make sure USB is already connected to VCI, network is in connection status. Then click OK.
-Establishing vehicle communication…ignition is on again, welcome screen is reading PIN.
-Record the PIN code, please.
– Tap “ESC” to back to select “Immo status scan”, press start/stop button, then click Yes.
Tap “BCM DTC” -> “Clear DTC” -> Yes to confirm to delete the DTC-> ESC.
Tap “All Smart Keys Lost”, then follow the on-screen instruction to do.
Establishing the vehicle communication;
Initializing;
Press the Start /Stop button once;
Place the smart key to be learned into the key slot and take other keys out of the vehicle…
Tap “OK” to confirm the 4-Digit Pin Code;
Please switch off the ignition;
Configuring the system, please wait 12 minutes;
Establishing the vehicle communication…
Checking PIN code, the process can take up to 5 minutes…
Establishing the vehicle communication…
Configuring the system, please wait 12 minutes;
Press the Start /Stop button once;
Configuring the system, please wait 10 minutes;
The current key is complete the matching.
Switch the ignition off;
Press and hold the Start / Stop button for 12 seconds;
Release the Start / Stop button;
Configuring the system, please wait 5 minutes;
Please long press the Start /Stop button to turn the ignition on until the instrument light illuminates;
Switch the ignition off;
Step on the brake, press the Start /Stop button to start the engine and wait for 5 seconds;
Configuring the system, please wait 5 minutes;
Switch the ignition off;
To test the smart key works or not:
- Turn off the engine.
- Open and close the driver door.
- Remove the smart key, press the lock and Unlock buttons simultaneously, and then release both.
Job is done. As you can see, Chevrolet(US) Volt 2011-2015 all keys lost programming job is easily done using Autel IM608 by following the on-screen instructions.