Hello guys, today I’m going to show how to program a blade key for Toyota Corolla Matrix 2008 with Autel MaxiPRO MP808TS scan tool. This key here specifically applied for the 2004-2008 Corolla or Corolla Matrix.
Here are 2 keys: a master key & a new key.
Connect Autel MP808TS with OBD, press
Service >> Immo keys >> Toyota >> Automatic selection >> Read >> OK >> Yes
Hot functions >> Auto remote match >> Key registration
Use this function to register a new transponder code, press “OK”.
This function serves to register immobilizer keys, press “Next”.
Step1
Perform the operation below:
- Remove the key from the key cylinder.
- Insert the key back into the key cylinder.
- Turn the ignition on.
Press “Next”.
Step2
Remove the master key from the key cylinder within 20s, press “Next”.
Step3
Insert the new key to be programmed within 10s, press “Next”.
Attention: do NOT turn the ignition on.
Wait for registering…
Key registration is completed.
This key should start the vehicle now.
Press “ESC” to finish.
Let’s try the new key now, it can start the engine.
Key programming has done!
This is using Autel MP808TS diagnostic tool to add a new key for Toyota Corolla 2004-2008 successfully. Very simple to complete in 4 minutes.