How to Reset Nissan ABS/Traction ESP Light via Autel MK808?
There is an ABS light, and traction ESP warning light on the Nissan Qashqai+2 J10(2008/8-) dashboard, so I’m gonna use Autel MaxiCOM MK808 Scan Tool to diagnose what it caused.
Connect Autel MK808 with OBD, press
Diagnostics >> Nissan >> Manual selection >> Europe >> Great Britain >> Qashqai+2 >> J10 >> 2008/8- >> Yes >> Diagnosis >> Control unit >> ABS >> Read codes
It tells one fault code: “C1102 – RR LH SENSOR-1”, which means there is a fault with the rear left hand sensor. Actually, I have put a new ABS sensor in.
So let’s press “Erase codes”.
Ignition on and engine off? Yes
DTCs and freeze data will be deleted.
Press “Yes” to continue.
Codes have been successfully erased.
Return to the function menu and tap “Read codes” to verify.
It says “No fault codes detected”.
But the warning lights are all on, that’s characteristic of this vehicle. So I need to turn the engine off then back on.
Alright, all warning light have gone!
Completed!
Autel MK808 Diagnostic Tool also works on other models of Nissan, Subaru, Infiniti… any more to perform 25 maintenance reset services.
Specific maker supported welcome to contact us.