How to Update Autel VCI FIRMWARE

Hello guys, today  Auteldiag shows you how to update Autel VCI Firmware or VCI update for Autel Scanners (Autel scan tool). This procedure cuts across different makes of Autel scanners and applies to the MaxiVCI mini, MaxiVCI 100, and the wireless diagnostic interface (for the MK908 for example). It is essential in addition to routine Autel scanner updates, to have the vehicle connector interface aka wireless Bluetooth VCI, updated to the latest firmware to ensure optimal connectivity to vehicles. The MaxiVCI mini is used by tools like MaxiCHECK MX808TS, MaxiCOM MK808TS and MK808BT. Examples of Autel scanners that use the MaxiVCI 100 include the MaxiSYS MS906BT, MaxiSYS MS906TS, etc. The MaxiCOM MK908 uses the wireless diagnostic interface aka Bluetooth diagnostic interface.

How To UPDATE Autel [00 00 20][20210407 174233]

Here we are.

First of all,we should take care about :

  • 1.Ensure the device is well charged
  • 2.Connectuion to VCI is firm
  • 3.internet connection is stable


Step 1. Connect the VCI to the  table via supplied USB

How To UPDATE Autel 01 3 1


How To UPDATE Autel 04 1
Into the USB port, these two green lights come on which means it works


How To UPDATE Autel 05 1
USB connect indicators on the various models


Step 2. Connect the tablet to the internet via WIFI, then tab VCI Manager >> Update

How To UPDATE Autel 06 7 1

During the update process:

  • Do not leave this page during the upgrade
  • Do not disconnect the VCI


How To UPDATE Autel 08 1


The current version is V2.03, reboot your VCI  Bluetooth adapter  to completed the update

How To UPDATE Autel 10 1

Step3. Disconnect and then reconnect the USB to reboot the VCI

How To UPDATE Autel 11 1

Update completed!