Car model and year: Toyota Auris 2007
The tool used: Autel MaxiIM IM608 key programmer
Procedure
Connect Autel IM608 Tablet to your car via OBD
Insert the working blade key into the key slot
Turn the key into position 1.
IMMO >> Accord >> Blade key >>Europe >>AURIS HV >>Blade key
System data initializing. please wait…
Then confirm vehicle profile, tab YES to continue
Tab IMMO Status scan
Turn the ignition on while Establishing vehicle communication
Communication status Tips
The tester can not communicate with the vehicle ECU
- 1. Confirm the ignition switch is turned on
- 2.Check the test cable is connected well
- 3.Check the vehicle battery has power
- 4.Confirm if the vehicle is equipped with this system
- 5.Describe your problem and upload your log.
Tab IMMO Status scan again
Establishing vehicle communication…
>> Add Key>> start
Step1 Master key verification
Add key guided: insert the learned master key and turn the ignition on press OK to continue
Step2 Key programming
Add key guided: Remove the key, insert the key to be learned into the ignition lock (Just insert the key in the
off position and do not turn it to the on position!)wait for about 75s…
Add Key succeed ! then Tab ESC
Tab Rescan, here has two master keys
Check the new blade, it works!Autel IM608 add Toyota Auris 2007 New Key succeed!
Done!