2008 Ford E350 Parameter Rest via Autel MaxiIM IM608

Today I’m going to use the Autel MaxiIM IM608 diagnostic tool to do a parameter reset for a 2008 Ford E350. I just reprogrammed a used PCM for this vehicle, so the red light keeps blinking on the dashboard. That is the anti-theft system functions, which is not letting the vehicle start.

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (1)

 

All I have to do is to reset the parameter, here we go to the Autel IM608 scanner.

 

IMMO >> Accept >> VIN >> Auto detect >> Ford(USA)

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (2) 2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (3) 2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (4)

 

Manual selection >> Ford >> USA >> E-series >> 2008-2009 Blade Key

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (5)

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (6)

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (7) 2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (8)

 

Immobilizer(CAN) >> Immobilizer remote control learning >> Parameter reset

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (9) 2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (10) 2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (11)

 

Turn the ignition on, press “OK”.

 

Warning: You should only perform this procedure if you have replaced either the PCM or PATS on this vehicle. Press “Yes” to continue.

 

Learning successful, press “OK” to complete.

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (12)

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (13)

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (14)

 

It is surprisingly quick, now the red light is off.

 

I’m gonna turn off the ignition to see if the light has gone. All right, it is completely off.

2008 Ford E350 Parameter Rest Via Autel Maxiim Im608 (15)

 

As you can see, Autel IM608 Scan Tool does do a parameter reset in 3 minutes.

https://www.auteldiag.com/