Autel MaxiIM IM508 key programmer can add smart keys for Audi Q5 2014 successfully.
Working with XP400 Pro allows to program keys for more European vehicles.
Connect Autel IM508 with OBD,
IMMO >> Audi >> Manual selection >> Q5(8R/FP) 2009> >>2009-2017 >> Immobilizer V BCM2-immobilizer >> Read IMMO data
If vehicle has no Kessy: please insert the start key in the keyhole and turn ignition switch to ON. Turn on the instrument and then press “OK”.
If the vehicle with Kessy: please insert the key in the keyhole or place it in the key identification induction area. Turn ignition off first and then back to ON. Press “OK” after operation is completed.
If all keys are lost, please turn on the headlamps and hazard warning flasher, apply the brake and then press “OK”.
Reading IMMO data, please wait until 100%…
Vehicle anti-theft information was read out.
OK >> Learn key
Input the numbers of keys, press “OK”.
Note: if the vehicle only has transponders, put in sequence the keys that need to be learned in the transponders and turn off and then on the START/STOP button!
Press “OK”.
Put in sequence the keys that need to be learned in the ignition switch and turn to ON!
Keys have all been recognized. Saving data, please wait…
Key learning process: completed. Press “OK” to finish.
Check the keys, both of them can work normally.
Key programming has done!
This is a demo of how to use Autel IM508 with XP400 PRO to program new keys for Audi Q5 2014.