Autel MaxiAP AP200 is able to program 2003-2007 Honda Accord all keys lost via OBD successfully. Following I’ll demonstrate how to do it.
You may like:
Autel AP200 Review: Best Cheap All-System Scanner for DIY
http://blog.auteldiag.com/autel-ap200-review-best-cheap-all-system-scanner-for-diy/
How to program 2003-2007 Honda Accord AKL?
Here is taking 2003 Honda Accord as an example.
- Identify vehicle model
Hook up the Autel AP200 with OBD, and have the key in the ignition.
Go to MaxiAP200 app,
Service >> Immo keys >> Honda >> Manual selection >> USA >> Hot function >> Read info, OK
Note: Keep ignition ON until the tester directs you to turn the ignition off.
- Check key numbers to delete
OK >> System check, number of keys and status log >> OK >> Number of keys >> OK
1 key is registered.
Go back to
Add and delete keys >> OK
- Program all keys lost
All keys lost >> Read notes, OK >> Input key numbers to register, OK
Just follow the instructions to operate:
Turn ignition switch off.
Turn ignition switch on.
Turn the ignition switch off within 16s.
Turn the ignition switch to on within 14s, without changing the key.
Turn ignition switch off.
Turn ignition switch on.
Is the immobilizer indicator light turned off? Yes
Turn ignition switch off.
Turn ignition switch on.
The registration of keys has been completed.
Turn ignition switch off.
Check all keyless access remotes to ensure each will start the engine.
As you can see, it starts the car without any problems.
Done!
This is using Autel AP200 to program 2003 Honda Accord successfully.