Autel MaxiIM IM508 Key Programmer supports to add a smart key for Mitshubishi Attrage 2018 by OBD successfully. For more IMMO functions supported, please check the form below, or https://www.autel.com/vehicle-coverage/coverage2
IM508 IMMO Mitshubishi(EU) Attrage Car List
| Year | System | Add Key | All Keys Lost | Remote Learning |
| 2014 | Immobilizer(CAN)(Blade Key) | By OBD | × | By OBD |
| 2014 | Keyless system(CAN)(Smart Key) | By OBD | By OBD | × |
| 2015- | Immobilizer(CAN)(Blade Key) | By OBD | × | By OBD |
| 2015- | Keyless system(CAN)(Smart Key) | By OBD | By OBD | × |
How to program a new smart key for Mitshubishi Attrage 2018?
Requires: 1 working key, and blank new key.
Connect Autel IM508 with OBD2 port, press
IMMO >> Accept >> Mitshubishi >> Auto selection >> Read, OK >> Yes >> Smart key >> Immo status scan >> Key learning
Insert a learned smart card into the key card slot.
The card slot is near the bottom of the steering wheel, or in the co-pilot storage compartment. If there is no card slot, please close the key to the start button.
Learning succeeded.
Insert the next smart card into the key card slot within 30s, press “Yes”.
You can go on learning keys…
Otherwise, press “No” to complete.
Learning is completed.
Test the new keys now.
All can start the engine, and the remote can work well.
Adding keys has done!
This is using Autel IM508 to add a new key for Mitshubishi Attrage 2018 successfully. You may try on a 2019/ 2020/ 2021 Mitshubishi Attrage as well.