Today, we’re going to be doing the key for VW Passat CC all keys lost via OBD using AUTEL IM608 and XP400
Main steps:
- Step 1. Function and vehicle select
- Step 2. Read engine IMMO Data
- Step 3. Make dealer Key & Search for 7th byte of CS code
- Step 4.Key Learning
Step 1. Function and vehicle select
>>IMMO>>Volkswagen>>>>Expert selection>>Comfort module Passat B6/CC>>select key”48 Key”
Step 2. Read engine IMMO Data
Turn ignition off and on, Then we will get our pin and CS code
Step 3. Make dealer Key & Search for 7th byte of CS code
here we need connect the XP400 (XP200 and XP400 pro can work as well ) to make dealer key
Search for 7th byte of CS code when all keys are lost
Put the original key in the programmer to continue
Here we got our key calculation
Search for 7th byte of CS success, press OK
Make dealer Key again, 2nd key need to be as a dealer key to program, put a blank key in the
programmer keyhole and then press “OK
Make dealer key success!
Step 4.Key Learning
Enter the number of key to program
deleting all keys
7th byte is 00 as shown before will get the 7th byte in next step
Turn ignition off and then pull out the key, wait for 5s reinsert the key to turn ignition switch to ON
Now take of original key and put seconded key to igniaition and turn on
2-2 need to show in instrument cluster, press OK to continue
Key learning completed!
